7. FAULT FINDING
No flame-effect.
Check the fused spur is switched ON.
Check fuse in the fused spur.
Check the wiring connections at the fused spur.
Fan does not run on any switch setting or no heat output on electric heating.
Check the power supply is switched ON.
Check the fuse in the fused spur.
Check the wiring connections at the fused spur.
Check overheat protection as below.
Overheat Protection – electric heating mode
This appliance is fitted with automatic overheat protection. To manually reset, turn off
the power at the fused spur, wait 5 minutes then switch the power back on. In the
event of difficulty, please Telephone us on
0844 8711 565
(National call rates apply
in the United Kingdom). In the Republic of Ireland Telephone
0044 844 8711 565.
It will be more helpful if you do not remove the product from the central heating
system.
No heat output on central heating mode.
Ensure the room thermostat is calling for heat.
Vent any trapped air from the system (with the central heating turned OFF).
Check the central heating is switched ON.
Balance the central heating system if installed on the same circuit as panel
radiators and increase the circulating pump speed if required.
Increase the boiler temperature.
Page 17
©
Baxi Heating U.K. Limited 2009.
INSTALLER GUIDE
Содержание 870 hydroflame Dream
Страница 28: ... Baxi Heating U K Limited 2009 ...