The heater must be secured into position to prevent it from being tipped over.
The following securing options are available:
Method A
- Securing the heater with
Screws
.
Method B
- Securing the heater with
Wire
.
Method C
- Securing the heater using the
Spacer Frame
supplied with the
heater (Not applicable on Regalia model).
Method D
- Securing the heater using the
Optional Spacer Frame
(kit number
0584081)
(Not applicable on Regalia model)
.
Method E
- Securing the heater in an elevated position using the
Optional
Spacer Frame kit
(kit number
0584081)
and the
Elevated Installation kit
(kit
number
0584091)
(Not applicable on Regalia model).
(The Classica fascia has been designed for traditional installations where the
base of the fascia sits on a hearth or similar surface. For this reason we do not
recommend the Classica model for wall mounting).
If fitting the heater into a fireplace or surround opening, try the heater in the opening
to ensure that it will fit.
If fitting the heater onto a decorative hearth surface such as marble or tile it is
advisable to protect the hearth surface. Do not drag the heater as the surface finish
may be damaged.
Method A - Securing with screws.
Note - If fixing to marble it is recommended that
Method B - ‘Securing with wire’ is used. Drilling
marble without the correct tools and experience may
result in the marble cracking.
1.
Place the heater into the fireplace or surround
opening
.
Make sure that the heater is in the middle
of the surround or fireplace.
2.
There are two slotted holes in the top of the heater
and four holes in the side flanges (See figure 4). We
recommend the use of two upper holes and two
lower holes. Mark through the required holes so that
their position is clear when the heater is removed.
3.
Remove the heater.
4.
Drill an appropriate size hole in each of the
marked positions for the wall plugs supplied. Insert
wall plugs into the drilled holes.
5.
Place the heater so that the holes are in line with
the wall plugs in the fixing surface.
6.
Screw and secure the heater with four wood screws - (See figure 3 and
4
).
Page 10
INSTALLER AND OWNER GUIDE
©
Baxi Heating U.K. Limited 2009.
Figure 4. Screw location
Содержание 844
