Valor Fires 823, Инструкция для установщика и владельца

Страница: 9 / 20

cable guide will open (See figure 3 - Item 2).
3.
Lift the electric cable clear of the cable guide.
4.
Hold the bottom of the cable guide close to the heater then gently pull the cable
guide away from the rectangular slot (See figure 3 - Item 3).
Fitting the cable guide.
When fitting the cable guide please remember that the wider part of the cable guide
has to be fitted against the outer edge of the base (See figure 3 - Item 1).
1.
Gently pinch the sides of the cable guide (See figure 3 - Item 4) and push the
cable guide into the required rectangular slot.
2.
Place the electrical cable into the guide and close the top of the cable guide.
If the electric cable is damaged, to avoid a hazard it must be replaced by a Valor
Fires authorised service agent, or similarly qualified person.
All external wiring between the heater and the electrical supply shall comply with
current IEE regulations.
Page 9
INSTALLER AND OWNER GUIDE
©
Baxi Heating U.K. Limited 2008.
Figure 3. Removing and positioning the cable guide.
Item 1
Item 2
Item 3
Item 4