Valor Fires 823, Инструкция для установщика и владельца

Страница: 8 / 20

Heater dimensions.
Moving the cable guide.
At the base of the heater you will find an electric cable which runs through a
rectangular plastic cable guide. As supplied the cable guide is fitted into the
rectangular cut-out on the right side of the heater. If required, the cable guide can be
removed and put in the rectangular slot on the left hand side of the heater. For
removal and fitting please see the following sections.
Removing the cable guide
1.
Before removing the cable guide please note that the wider part of the cable guide
is on the outer edge of the base (See figure 3 - Item 1).
2.
To remove the cable guide push and lift the tab on the bottom. The bottom of the
Page 8
INSTALLER AND OWNER GUIDE
©
Baxi Heating U.K. Limited 2008.
Figure 2. Heater dimensions (Fascia may differ from that shown)
Model Dimension A Dimension B Dimension C
Liberty 841 640 148
Vermont 841 640 148
Figure 1 continued (Items are not to scale)
Contents Qty
(Illustrations are not
to scale)
Contents Qty
(Illustrations are not
to scale)
M5 x 10
screw
2
Battery
‘AAA’
2
Remote
Control
Handset
1