background image

2. My heater is on but there is no light or heat.

The first thing to do is check the wall socket. To do this plug in a known working
appliance. If the appliance you have plugged in works then there is a good chance
that the problem lies with the 13Amp fuse in the heater plug. If either fuse or socket is
suspected, have them checked by an electrician.

3. My heater is on but there is no heat.

A cut out device is fitted to the heater to prevent damage due to over heating.  If it
operates due to an obstruction in the airflow, the heater must be turned off and
allowed to cool for 15 minutes and the obstruction removed before restarting.

4. I have a problem that is different to those in the previous examples
1- 3.

Please call the

Valor Fires Technical Helpline.

Telephone 

0844 8711 565 

(National call rates apply in the United Kingdom).

In the Republic of Ireland Telephone

0044 844 8711 565.

For spares inquiries

Spare parts are available nationwide via the ‘interpart stockist network’. For
your local stockist consult Yellow pages under ‘Central Heating’.

6. ENVIRONMENT

What should I do when I’m ready to dispose of my heater?

The plug should be removed from the mains supply cable and the mains supply cable
cut from the heater.

Environmental Protection.

Waste electrical products should not be disposed of with household waste. Please

recycle where facilities exist. Check with your local authority or retailer for
recycling advice.

Page 16

INSTALLER AND OWNER GUIDE

© 

Baxi Heating U.K. Limited 2008.

Содержание 823





















Отзывы: