4. FUNCTION SPECIFIC DETAILS
4.1 SENSOR/SWITCHING MODULES
4.1.1 3 WIRE PNP / NPN SWITCHING SENSORS (30S, 30W)
Specifications
Configuration
(2) 24 VDC N.O. solid state sensors.
Self-learning outputs for NPN/PNP/Sinking/
Sourcing PLC input cards.
(1) 24 VDC output for external solenoid.
Self-learning control input for NPN/PNP/Sinking/
Sourcing PLC output cards.
Voltage range
18 - 30 VDC
Minimum on current
2.0 mA
Maximum continuous current
0.1 amps
Maximum leakage current
0.0
Maximum voltage drop
0.1 volts @ 10 mA
0.5 volts @ 100 mA
Operating power (1 LED “ON”
Solenoid “OFF”)
0.6 watts
Operating power (1 LED “ON”
2W Solenoid “ON”)
3.0 watts
Circuit protection
Protected against short circuits and direct
application of voltage with no load.
Output Specifications
Solenoid input voltage
18 - 30 VDC
Solenoid output voltage
24 VDC
Solenoid output current
85 mA
Solenoid output power
2.0 watts
Circuit protection
External solenoid output is short circuit protected
Bluetooth features (30W)*
Allows Set Open / Set Closed via Bluetooth
Stroke times
(Only functions when attached to
external solenoid)
Valve Position graph
Lifetime Cycle Count
(non-resettable
)
Wiring diagrams
+
–
+
–
1
2
3
4
5
6
7
8
Closed V
SE
T O
PE
N
SE
T
CL
O
SE
D
Solenoid
Power
Module
Status
V Open
Sol Ctrl
Sol Out
seconds
Push for 2
R
G
R
G
Signal
V +
MALE (PINS)
MALE (PINS)
1
1
2
2
5
5
4
4
3
3
5-PIN MICRO CONNECTOR (M12)
5-PIN MINI CONNECTOR
OPEN
V -
CLOSED
SOL CTRL
Pin
1
2
3
4
5
Signal
NOT USED
FEMALE (PINS)
FEMALE (PINS)
2
3
1
5
2
3
1
4
5-PIN MICRO CONNECTOR (M12)
3-PIN MINI CONNECTOR
NOT USED
SOL OUT -
SOL OUT +
NOT USED
Pin
1
2
3
4
5
Signal
NOT USED
SOL OUT -
SOL OUT +
Pin
1
2
3
Common receptacle options pin-out
Note
Consult factory for additional quick connector options.
* Unlocking the Bluetooth features (30W only)
The device is unlocked until any of the signals (Open/Closed/Solenoid)
are wired to a PLC/DCS card, at which time it locks and it cannot be
unlocked until unwired and power cycled.
Stonel product publication 105509revA | EC70EN- 6/2022
8
