Vallox Pureo TX 1300 Скачать руководство пользователя

Страница: 3 / 60

SAFETY

Safe and appropriate handling requires knowledge of the basic safety

regulations, and of the intended use of the ventilation system. Please

read this manual before operating the air handling unit and keep it for

later reference. If you lose this manual, it can be downloaded from our

website.
This user manual contains all the information necessary for the safe

operation of the system. All persons who operate and maintain

the ventilation system must follow the instructions provided in this

manual. Furthermore, all local accident prevention regulations must be

observed.

Installation

Installation and setup should only be carried out by a qualified expert.

Electrical installations and connections must only be carried out by an

electrician and in compliance with local regulations.

GUARANTEE

The guarantee and liability exclude damage resulting from:

• Inappropriate use of the ventilation system or the control unit

• Incorrect or inappropriate installation, setup, or use

• Neglect of instructions concerning transportation, installation, use,

or maintenance

• Structural or electronic modifications, or changes made to the

software

INTENDED USE

All Vallox air handling units have been designed to provide appropriate

and continuous ventilation so as to present no threat to the health of

people and to maintain the structures of the building in good condition.

DISPOSAL OF THE AIR HANDLING UNIT

Do not dispose of electronic devices with household waste. Follow

local laws and regulations on safe and ecological disposal of the

product.
Ensure that

• the components are separated and sorted according to material

types.

NOTE

For further information,

go to www.vallox.com

INTRODUCTION

WARNING

The unit is not intended

to be used by children

under the age of 8

or by persons with

reduced sensory,

physical or mental

capabilities, or whose

lack of knowledge

and experience does

not ensure the safe

operation of the unit.
Such persons can

use the unit under

supervision, or

by following the

instructions of someone

who is responsible for

their safety.
Children must be

supervised and not be

allowed to play with the

device.

DANGER

The electrical

connection must be

fully isolated from the

mains power supply

until final assembly!

Содержание Pureo TX 1300




























































Результаты поиска

Содержание Pureo TX 1300

Отзывы:

Похожие инструкции для Pureo TX 1300

Бренды по названию

Популярные бренды

Vallox Pureo TX 1300, Руководство пользователя

Результаты поиска

Содержание Pureo TX 1300

Отзывы:

Похожие инструкции для Pureo TX 1300

Бренды по названию

Популярные бренды