Vallox Pureo TX 1300 Скачать руководство пользователя

Страница: 5 / 60

INTRODUCTION

FIELD OF APPLICATION –

INTENDED USE

Vallox Pureo TX air handling units are energy-saving, fully automated,

low-noise and ready-to-operate ventilation units with heat recovery.

Vallox Pureo TX is available in four different models that meet the

volume flow rate requirement of up to 1800 dm³/s. There is an ePM1

60% class filter on the outdoor air side and an ePM10 60% class filter on

the extract air side as standard.
Vallox Pureo TX units are equipped with highly energy efficient, low-

noise, and power-saving fans. Fans that are equipped with EC motors

can be operated by using three fixed speeds, or alternatively by using

the integrated smart controller with the help of air quality sensors.

Vallox Pureo TX units are equipped with cross counterflow heat

exchangers, in which the heat contained in the extract air is recovered

before the air is blown outdoors through the plates. The process is

completed so that the air flows remain separate. Depending on the

operating conditions, more than 80% of the heat contained in the

extract air is recovered before the air is blown outdoors.
Supply air is transmitted to the primary areas (where supply air is

needed) via the duct system. Used air is extracted from the secondary

areas (such as social facilities, toilets, and showers). It flows through

the duct network back to the ventilation unit, where heat is recovered

before the air is discharged outdoors through the exhaust air duct.
Vallox Pureo TX units are only intended for the handling of air and for

performing the following tasks:

• Filtering normally polluted air

• Heating and/or cooling of the air (with accessories)

• Heat recovery

• A combination of the above functions
The intended use also includes the observance of the operating

manual, the manufacturer‘s instructions for individual components, and

the inspection and maintenance intervals stipulated by Vallox.
Vallox Pureo TX units with the standard equipment are designed to be

installed and used in frost-free premises (room temperature > 0°C). The

availability of a frost-free condensate outlet must be ensured on site.

The corrosion resistance class of the housing is C4 in accordance with

ISO 12944. The unit can be used under these conditions.

Application limits:

• Ambient temperature 0-50°C

• Humidity (max.) 95% RH

IMPORTANT

Material damage due to

the unit freezing!

NOTE

Any use other than

the intended use is

prohibited!

Содержание Pureo TX 1300




























































Результаты поиска

Содержание Pureo TX 1300

Отзывы:

Похожие инструкции для Pureo TX 1300

Бренды по названию

Популярные бренды

Vallox Pureo TX 1300, Руководство пользователя

Результаты поиска

Содержание Pureo TX 1300

Отзывы:

Похожие инструкции для Pureo TX 1300

Бренды по названию

Популярные бренды