Valley Tool Vrisimo Sanitizer, Руководство пользователя

Страница: 9 / 32

4
Sanitizer
by

Keep away from the machine un l all the ener‐
gy has dissipated. This includes the complete
stopping of the drum’s rota on as well as the
dissipa on of pressure in the hydraulic lines.

In the event that a failure does occur during
opera on or if the machine begins to produce
excessive noise or vibra on, shut the machine
down immediately and repair before any con‐
nued use.

Never leave the machine una ended unless it
is in the storage or transport posi on.
 In addi on to the design and configura on of
equipment, hazard control and accident pre‐
ven on are dependent upon the awareness,
concern and prudence and requires suitable
training of personnel involved in the opera‐
on, transport, maintenance and storage of
equipment.
Maintenance Safety
 Before performing maintenance on this ma‐
chine, read the owner’s manual thoroughly.
 Maintenance should only be performed by
properly trained individuals. It is the Owner’s
responsibility to ensure all individuals involved
in maintaining the machine are properly
trained in the appropriate language.

Be sure to inspect all safety devices before
each use. If safety devices are worn in such a
way that they can no longer properly perform
their guarding func on, contact your nearest
Vrisimo dealer for replacements.
 Maintain all safety decals and make sure they
are visible to the operator. If decals are worn,
contact your nearest Vrisimo dealer for re‐
placements.

Replace cracked or broken blades with new
ones. Don not a empt to weld damaged
blades . This can cause damage that could re‐
sult in the blade being thrown from the shred‐
der.
 Wear gloves and eye protec on and exercise
care when handling blades as they can be
sharp. Also be alert to worn or damaged surfac‐
es that could have sharp edges.

Disengage PTO, shut off engine and allow all
movement to stop before leaving the opera‐
tor’s posi on to adjust, lubricate, clean, or un‐
clog the machine. Do not try to uncouple hy‐
draulic hoses unless the pressure has ade‐
quately dissipated.

Before working on or underneath the machine,
place blocks on both sides (front and back) of
power unit’s res or treads and under each end
of the a achment to prevent accidental lower‐
ing of the machine. Also, remove the igni on
key from the power unit and allow all move‐
ment to stop before beginning work.