Valley Tool Vrisimo Sanitizer, Руководство пользователя

Страница: 14 / 32

Adjustments & Maintenance
Lubrication
Transport, Removal and Storage
Disengage PTO and shut off engine allowing all move‐
ment to stop before leaving the operators posi on to
adjust, lubricate, clean or unclog the machine. Before
working on or underneath the mower/ shredder,
place blocks on both sides (front and rear) of tractor
res and under each end of the mower to prevent ac‐
cidental lowering of the machine. Also remove the
igni on key from the tractor and allow all movement
to stop before beginning work.
a) Transport on power unit
1) PTO must be disengaged, unit li ed off the ground
b) Transport on Trailer
1) Chain down loca ons even if unit is s ll a ached to
tractor, secure PTO sha
c) Removal
1) Remove the adjustable top link from the tractor
and mower
2) Disconnect the drive sha from the tractor and
mower
3) Remove the safety pins from the lower two link
points. Remove the tractor arms from pin loca‐
ons and re‐insert the pins for storage.
d) Storage
1) Put the drive sha away in a clean, dry place
2) Clean the mower thoroughly (See the “Cleaning
your Mower” sec on for details)
3) Relax belt tension (See the “Adjustments &
Maintenance” sec on for details)
4) Lubricate the mower as recommended (See the
“Lubrica on” sec on for details)
5) Check oil level in gearbox and fill as required ( See
the “Lubrica on” sec on for details)
6) Check for worn parts and replace so you will be
ready to mow when necessary. (see the
“Adjustments & Maintenance” sec on)
7) Store in a clean, dry place
9
www.vrisimo.com
Loca on Grease Type
(NLGI)
Lubrica on Interval
(hours)
Quan ty
Cu er Drum 2 10 As needed
Back Roller 2 10 As needed
Driving Pulley 2 10 As needed
Driveline 2 10 As needed
Loca on Oil Weight Lubrica on Interval
(hours)
Quan ty
Gearbox SAE EP 90W As Required Fill to upper
middle
fi ng
Top Sha 2 10 As needed