Valley Tool Vrisimo Sanitizer, Руководство пользователя

Страница: 17 / 32

Sanitizer
by
12
Frequently Asked Questions
Q. When I am replacing gear oil, how much should I add?
R. When replacing gear oil, fill from the Upper‐middle fi ng and when oil begins to come out, the
box is full.
Lower-Middle Fitting
Q. Are there any advantages to reversing cu er drum rota on?
R. Whether or not reversing cu er drum is advantageous depends on the applica on. In most, normal
rota on is a reverse rota on. This means that the cu er drum rotates in a fashion that would throw
grass or clippings towards the tractor. The only advantage to reversing rota on would be if you are
mowing in industrial applica ons such as along freeways, in places with large amounts of debris (i.e.
plas c, metal, rocks), or using a front mount applica on. There are typically no advantages as far as the
grade of cut you will get, but rather safety advantages as stated above.
Q. How do I reverse cu er drum rota on?
R. To reverse cu er drum rota on, simply un‐mount the gearbox from its current posi on, remove the
safety cover from the other sha of the gearbox and rotate the gearbox so that the previously covered
sha is the one that will be driven by the PTO. Install the safety covers and it is ready to go. Note:
Scoop knives must be rotated to accommodate for a reversed cu er drum rota on.
Q. How do I replace my knives?
R. Replacing the knives may vary depending on your model of mower/shredder. See the Adjustments/
Maintenance sec on for detailed informa on.
Q. When connec ng my PTO sha , can I put it on either way or should a specific side go to the mower/
shredder and the other to the tractor?
R. The PTO sha s for these mowers/shredders are side specific. The tube half of the PTO sha goes to
the mower/shredder and the bar half of the PTO sha goes to the tractor.