18
Use scene
With guitar box (using FX-Loop function to rear GP-200)
In this scenario, the AMP module (included) will be blocked before, and the effect chain after the AMP module will be used between the front and back stages of the sound box. In order to
get the correct tone performance, please keep the CAB module closed or turn on the "No-CAB" mode to avoid adverse effects on the tone. In addition, pay attention to the GP-200's level
meter indication. If there is an explosive sound, please reduce the input volume in "Global-Input/Output", or adjust the input mode to Line to try to get a satisfactory tone.
With guitar box (using FX-Loop function, 4CM connection)
Use this connection method to divide the effect chain of GP-200 into two parts (as shown in the figure below). This method can place the PRE and DST modules of GP-200 before the front stage of the guitar
cabinet, and simultaneously set the EQ, The MOD, DLY and RVB modules are placed between the front and back stages of the sound box.
In order to get the correct tone performance, please keep the AMP and CAB modules closed to avoid adverse
effects on the tone. Also note that, please adjust the FX-Loop usage mode to: Series in the preset settings.
INPUT
SEND RETURN
Audio Studio (Live Performance)
In this scenario, GP-200 will be used as a sound card for computers or mobile phones. Use the supplied USB cable to connect to the computer. If it is
connected to a mobile phone, an additional OTG adapter cable may be required. When used under Windows systems before Windows-10, it needs to be used
with the official ASIO driver; plug and play on systems after MacOS, iOS, Android and Windows10. At this time, GP-200's input signal (INPUT) and auxiliary
input signal (AUX-IN)* will all be used by USB connected devices.
* Please make sure that the "Global-USB Audio-AUX Connect to USB" function is turned on.