10
Global Settings
Input/output
This item is used to adjust input and output related parameters.
Ÿ
Input mode:Adjust the input impedance value, including three options: guitar, electric
guitar and linear input:
◦
木
Guitar: Impedance is 1MΩ, used to connect electric box guitar or
piezoelectric pickup;
◦
Electric guitar: Impedance is 4.7MΩ, used to connect electric guitar with
coil pickup and use;
◦
Linear input: The impedance is 10kΩ, which is used to connect analog audio equipment such
as synthesizers.
◦
The default value is an electric guitar.
Input gain:Make different choices for the different instruments you use to get the
best experience. The adjustment range is -20dB to +20dB, and the default is 0dB.
No cabinet mode (L/R):By activating the boxless mode of the left and right channels, the corresponding
analog output interface output does not include the audio effects processed by the CAB module, so that
different external sound boxes can be used at the same time. The default is off.
Ÿ
closure
No cabinet mode (R)
closure
Ÿ
USB audio
This item is used to set the related settings when using GP-200 as a USB sound card.Recording
volume:Used to adjust the total output volume during internal recording, the range is ±20dB, and the
default is 0dB.
Ÿ
Left channel/Right channel:GP-200 has a USB stereo virtual output channel. When the sound
mode is selected, the corresponding channel outputs a pass-through signal; when the effect
sound mode is selected, the corresponding channel outputs a signal with effects. This function
can easily realize the function of "listening to wet recording", and the default is the effect sound.
AUX connects to USB:After turning on this function, the audio input from the auxiliary input
interface (AUX-IN) can be recorded by the USB device. This means that when using GP-200 for live
streaming, you can mix the audio input from AUX with the effects of this unit, and then output to
the live streaming device via USB.
Monitoring volume:Used to control the volume during playback via USB, the adjustment range is
-20dB to +20dB, the default is 0dB.
Ÿ
Recording volume
Left channel
Effect sound
Right channel
Effect sound
Aux connects to USB
Turn on
Monitor volume
Ÿ
Foot spikes
This item is used to set the template for the use of foot spikes and the foot spike function settings in the template.
Ÿ
The fast adjustment knob -1 selects the preset group switching mode. This setting affects both internal
and external feet. Two modes are provided: real-time mode and waiting mode.
◦
Real-time mode: When switching the preset group, the preset group will jump instantly
◦
Pre-selected mode: the default mode. When switching the preset group, the preset does not jump
directly. The screen enters the preselection interface, and the pin function is fixed in this interface.
The preset will not jump until a confirmed preset number is selected change
Turn the quick adjustment knob 2 or press the PARA knob to enter the foot nail editing interface, and start to set
the specific functions of the foot nails in the template in detail, as shown in the figure below:
Preset group
Switch mode
Preselection
set up
Ÿ
