40
Effect list
Modulation (MOD)
Effect name
type
Effect description
Parameter Description
Depth: Adjust the depth of the effect
Rate:
Adjust the speed of the effect
Volume:
Control output volume
Sync: Dot fixed speed synchronization switch
Bias: Adjust the offset change of the waveform
Bias-
Trem
Vibrating
Tremolo
By adjusting the bias voltage of the amp head to create a unique
Vibration effect.
transposition
Pitch
This is a detuning effect, it will slightly shift the signal and
The original signals are combined to create a tone similar to a chorus.
Detune: Adjust the effect detuning amount in units of 1 pitch
Wet/Dry
:
Control the volume of the effect sound/original sound
Detune
Mix:
Control the mixing ratio of original sound and effect sound
Krush:
Adjust the sampling rate of the effect
Bit:
Adjust the rate of effect
Hi-Cut/Lo-Cut:
Control effect high cut/low cut degree
Bit-
Smash
special
Special
Provides a retro and unique sound effect in a down-sampling manner
fruit
Delay (DLY)
Effect name
Pure
type
Effect description
Produces pure and precise delayed tone
Parameter Description
Delay
Delay
Delay
Delay
Mix: Adjust the mixing ratio of the original sound and the effect sound
Time: Adjust the delay time
Feedback: adjust the amount of delayed feedback
Sync:
Dot fixed speed synchronization switch
Trail: Effect tail tone retention switch, turn on this switch after the effect is closed
The effect tail will decay naturally instead of disappearing directly
Analog
Produces warm analog delay tone
Delay
Delay
Tape
Analog transistor tape delay tone
Produces a ping-pong delay effect, every feedback of it will be on the left
The right channel appears alternately, allowing you to play every tone
The character shuttles back and forth in your head like a ping-pong ball
Delay
Delay
Ping-Pong
Mix: Adjust the mixing ratio of the original sound and the effect sound
Time: Adjust the delay time
Feedback: adjust the amount of delayed feedback
Trail: Effect tail tone retention switch, turn on this switch after the effect is closed
The effect tail will decay naturally instead of disappearing directly
Delay
Delay
Slapback
Simulate the classic Slapback delay effect
Mix: Adjust the mixing ratio of the original sound and the effect sound
Time: Adjust the delay time
Feedback: adjust the amount of delayed feedback
Sweep-Depth: Adjust the depth of the sweep filter
Sweep-Rate: Adjust the speed of the sweep filter
Swp/Time-Sync:
Sweep frequency/delay time dotting fixed speed synchronous switch
Trail: Effect tail tone retention switch, turn on this switch after the effect is closed
The effect tail will decay naturally instead of disappearing directly
Sweep-
Echo
Delay
Delay
Produces a delay effect with sweep filter modulation
Dly-Mix:
Adjust the mixing ratio of the original sound and the delay effect sound
Time: Adjust the delay time
Feedback: adjust the amount of delayed feedback
Ring-Mix: Adjust the mixing ratio of the original sound and the modulation effect sound
Freq: adjust the modulation frequency
Tone:
Adjust the modulation effect tone brightness
Sync: Dot fixed speed synchronization switch
Trail: Effect tail tone retention switch, turn on this switch after the effect is closed
The effect tail will decay naturally instead of disappearing directly
Delay
Delay
Ring-Echo
Produces a delay effect with ring modulation tone
* The names of vendors and products mentioned in this information are only used to visually explain the effect, tone, and functional characteristics of the product, and the brand names belong to their company.