Radar based Blind Spot Information System
MBHL TypA Operating & Integration Manual
Remarks:
Certification Documentation
Revision:
2.1
Date:
12/12/2011
Page:
25 of 29
VALEO-RADAR SYSTEMS, INC.
Laiernstr. 12, D-74321 Bietigheim-Bissingen / Germany
+ 49 (+7142) 916 – 0
+ 49 (+7142) 916 – 4000
This document is the exclusive property of Valeo-Raytheon System, Inc.
It cannot be communicated or divulged to anybody without a previous written authorization.
The connector is defined by the OEM and has to be compliant with VRS tools.
4.4.5. Mechanical mounting
4.4.5.1. General requirements
Attachment applied force shall not exceed 26N per mounting tab of the BSD
Sensor. Retention force of the attachment system shall exceed 110N normal and
shear.
4.4.5.2. Sensor to car body attachment
Each BSD Sensor will be directly attached to a bracket using one screw and the 2
tabs. The whole assembly part will then be attached to the car body using 2
screws.
4.4.6. Sensor alignment & test
The BSD Sensors shall not require alignment at the vehicle assembly plant.
4.4.7. Fascia properties
The BSD Sensors shall be compatible with the painted fascia.
For field of view obstruction evaluation, use field of view dimensions from
Appendix C. The bumper material as well as the paints has to be measured for
transmissibility by VRS and jointly agreed between OEM and VRS.
4.5. Electrical features
Table 15:
Electrical requirements - General
Description
Parameters
Remarks
Ambient Temperature
Operating temperature range
−
40°C to +85°C
Storage Temperature range
−
40°C to +95°C
Module not powered
Supply voltage
Operating voltage range
12V
±
1V
Max 16V / Min 9V
Supply current
