Radar based Blind Spot Information System
MBHL TypA Operating & Integration Manual
Remarks:
Certification Documentation
Revision:
2.1
Date:
12/12/2011
Page:
12 of 29
VALEO-RADAR SYSTEMS, INC.
Laiernstr. 12, D-74321 Bietigheim-Bissingen / Germany
+ 49 (+7142) 916 – 0
+ 49 (+7142) 916 – 4000
This document is the exclusive property of Valeo-Raytheon System, Inc.
It cannot be communicated or divulged to anybody without a previous written authorization.
The concept and functionality of the HMI depends on each OEM, as examples:
•
HMI in form of telltales on both exterior rear view mirrors: amber for
ALERT
and red for
STATUS
.
•
HMI only to indicate the
ALERT
function: a telltale shall be incorporated into
the driver information system.
•
Activation of
ALERT
and
STATUS
signals coming from the CAN. HMI telltales
shall be located in the A-pillar on each side.
The functionality of such telltales, when activated directly by the sensors, shall be
designed by each OEM according to the data output of each BSD Sensor.
3.2.2. Functional content
3.2.2.1. Vehicle packaging
The BSD Sensor bracket and electrical harness must provide the following
functions:
•
Connect to vehicle electrical system;
•
Allow for removal and replacement of sensor;
•
Identify sensor as left side or right side;
•
Prevent squeak and rattle;
•
Fit to fascia or car body;
•
Define module position with regard to fascia, car body and car axis;
•
If possible, take up harness connector when BSD system is not fitted;
•
Prevent contamination and mud build-up, protect against “stone throw” from
tires.
3.2.2.2. BSD Sensor module
The BSD Sensor module shall provide the following functions:
