PAGE 6
10>TETHER STRAP
WARNING: USE THIS STRAP TO STOP THE STROLLER ROLLING AWAY
1>PARTS LIST
1x hood, 2x rear wheels, 2x front wheels,
stroller frame/seat.
2>TO OPEN
Remove the carton contents carefully.
Dispose of any packaging materials
thoughtfully.
Release the stroller from the locked position
by lifting the locking hinge from over the
locking rivet on the stroller frame. HINT: You
may have to squeeze the stroller legs and
handles closer together first so as to release
the tension on the rivet.
Standing behind the stroller and holding
it by the handles, allow the wheels to fall
forward.
With your foot, press down on the primary
locking hinge until the entire frame locks
into the open position.
IMPORTANT WARNING: ALWAYS
TEST THAT ALL LATCHES ARE
SECURELY ENGAGED BEFORE USE.
3>FRONT WHEELS
Insert the front swivel wheel over the housing
on the front leg. Be sure that the swivel lock at
the top of the housing is correctly orientated.
Repeat for the other wheel.
To fix the front wheels in the non swivel
position, turn the wheel so that the two
notches on both housings line up at the
front.
Lift the swivel lock until it locks into place.
To unlock, press down firmly on the swivel
lock to release.
IMPORTANT WARNING: ALWAYS
TEST THAT WHEELS ARE SECURELY
LOCKED IN PLACE BEFORE USE. IF YOUR
SWIVEL WHEELS ARE NOT PERFORMING
CORRECTLY, CHECK TO SEE THAT THE
WHEEL WAS CORRECTLY INSERTED IN
THE DIRECTION OF THE ARROW.
4>BRAKES
To activate the brake press down on each
brake lever until it engages in the brake cog
on the wheel.
To release, lift each brake lever in turn.
WARNING: ALWAYS engage BOTH WHEEL
BRAKES when the stroller is at rest.
5>HOOD
Attach each hood clip onto the frame just
above the folding hinge (a). Fasten the hood
Velcro straps around the top of the frame
(b). Repeat for the other side.
Arrange the rear hood skirt beneath and
INSTRUCTIONS
Scout IM_020818.indd 6
2/8/18 3:17 pm
