PAGE 7
www.veebee.com.au
around the seat back and secure the snaps
to the corresponding snaps found on the
back of the seat.
To extend the hood coverage, simply pull
the hood extension forward to the desired
position. To retract, reverse the process.
6>FOLDING
Lift the primary safety lock (a) with your foot.
Press down on the secondary lock (b) with
your foot.
Simultaneously push the handles all the
way down to meet the wheels.
When pushed down fully, the frame lock
should automatically engage. (c)
ALWAYS CHECK THAT THE FRAME
LOCK IS FULLY ENGAGED WHEN
FOLDED. TAKE CARE WHEN LIFTING THE
VEHICLE TO KEEP YOUR KNEES BENT
AND BACK STRAIGHT. DO NOT CARRY THE
VEHICLE BY THE HOOD OR THE REAR BRAKE
AXLE. ALWAYS USE THE CARRY HANDLE.
7>SEAT RECLINE
To lower seat lift tab (a) and pull the seat
down to desired position (b). To lift seat,
simply reverse process.
NOTE: ALWAYS TEST THAT THE
SEAT IS SECURELY FIXED IN
POSITION BEFORE USE. SPECIAL CARE
MUST BE TAKEN WHEN ADJUSTING THE
SEAT POSITION WITH A CHILD IN THE
STROLLER.
8>FOOTREST
To adjust your footrest downward, press
on each side adjuster while simultaneously
pressing down lightly on the footrest.
FOR SAFETY, YOUR FOOTREST IS
DESIGNED TO COLLAPSE IF EXCESS
WEIGHT IS APPLIED TO IT.
9>HARNESS
Your stroller harness is specifically designed
with many built in safety features.
This includes the requirement that, when
opened, all straps are released so that no
dangerous loops can be formed causing a
strangulation hazard.
WARNING: YOUR CHILD MUST
ALWAYS BE HARNESSED WHEN IN
THE STROLLER
Closing your harness: Slide each of the
shoulder strap bottom guides (a) into the
corresponding channel on the top of each
side strap prong. Insert each completed
prong into the central buckle housing (b).
Carefully adjust the harness straps to snugly fit
your child by adjusting the sliders (c) located
on each strap. The harness should be fitted to
your child’s body, tight enough so that they
cannot wriggle free of the straps but, loose
enough, so as not to cause any discomfort.
For even more flexibility, the height at which
your shoulder straps are fitted to the stroller
can be adjusted at 3 points(d).
To change the shoulder strap position:
Open the harness. Rethread the shoulder
strap strap back through the desired loop
on the front of the seat
Opening your harness: Press the central
housing button (e). This will release both
side prongs from the central housing.
The shoulder and waist straps will release
automatically from each other.
If the shoulder and waist straps do not
automatically disengage from each other,
manually slide the guides of the waist
channels. Your harness will separate into 5
sections.
IMPORTANT WARNING: WHEN NOT
IN USE, BE SURE THE SHOULDER
AND WAIST STRAPS ARE ALWAYS
DISCONNECTED FROM THE CENTRAL
HOUSING AND EACH OTHER
10>TETHER STRAP
WARNING: USE THIS STRAP TO
STOP THE PRAM/STROLLER
ROLLING AWAY.
Scout IM_020818.indd 7
2/8/18 3:17 pm
