VALBERG 1D NF 328 E S180C, Инструкция по эксплуатации, Страница: 7 / 38

10 11 EN EN
Using the appliance Using the appliance
B B
All the appliance's features and controls can be accessed from a dashboard located on the
top of the refrigerator. This dashboard makes it easy to configure the parameters and settings
of the appliance (Figure I) .
IMPORTANT!
• When the refrigerator is switched on, the indicator lights
come on for 3 seconds and the appliance makes a "beep"
sound. The control panel is composed of four buttons and
eight indicator lights. You will hear a kind of "beep" as
soon as you click one of the buttons.
Setting the temperature
For the preservation area to work normally, we recommend that you set the temperature of
the refrigerator to 2°C or 3°C when you switch it on for the first time. If you do not need to
use the freezer, we recommend that you set the temperature of the appliance to 5°C. If you
want to change the temperature, follow the instructions below.
CAUTION!
• When you set a temperature, you are setting an average
temperature for the whole refrigerator. The temperatures
inside the appliance may vary depending on the volume of
food you store and where you put it. Too high or too low a
temperature in the room can also affect the temperature
inside the appliance.
Temp
Press the "Temp" bolt to adjust the freezer temperature between 8°C and 2°C
according to your preference, and the indicator light corresponding to the chosen
temperature will light up. The values are shown in the following sequence:
Orders
Super
The Super Cool function cools the food much faster so that it can be preserved for
longer.
• Press the "Super" button to activate the SUPER COOL function. The SUPER icon will
light up and the refrigerator temperature indicator will show 2°C.
• The SUPER COOL mode switches off automatically after 6 hours.
• When the SUPER COOL function is activated, you can deactivate it by pressing the
"Super" or "Temp" button, followed by the temperature selector or the mode of your
choice to return to the previous settings.
Alarm
In the event of an alarm, the "Alarm" icon will light up and beep. Press "Alarm" to
stop the alarm and the "Alarm" icon will switch off.
Door alarm
The alarm indicator light is on and there is a sound alerting you to a malfunction, i.e. the
door has been opened accidentally.
• Leaving the refrigerator door open for more than 2 minutes activates the door alarm
and buzzer. The buzzer beeps 3 times per minute for 10 minutes. Close the door to
switch off the buzzer.
• To save energy, do not leave the door open for a long period of time when using the
refrigerator. The door alarm can also be cancelled by closing the door.
Power
If you are not going to use the appliance for a while, press the "Power" button.
• When the refrigerator is working, you can switch off the appliance by pressing and
holding the "Power" button for about 5 seconds, and the instrument panel will also be
deactivated. Important! Do not store any ingredients in the refrigerator during this time.
If you are not going to use the refrigerator for a long time, we recommend that you
unplug it from the power outlet.
• When the appliance is reconnected to the power supply, you can switch it on again by
pressing "Power" for 1 second, and the appliance will return to its basic settings.