Vaillant MultiMatic 700/2, Тренинг по продукту

Страница: 9 / 112

multiMATIC 700/2
Notes
10/2015 5 Training 0020228700_00
3 Planning and dimensioning
3.1 Planning requirements
3.1.1 Installation locations
●
Hanging on an interior wall in the living area.
●
Alternative: Installation in the boiler's electronics box
Hanging the controller on the wall: The controller should be installed in a place
where it can accurately detect the room temperature; for example on an internal wall in
the reference room, approximately 1.5 m from the ground. When hanging the controller
on a wall,
connect it to the boiler using a 2-core eBUS line.
External sensor
The external sensor should be installed in a location with the following characteristics:
●
Not fully sheltered from the wind
●
Not particularly draughty
●
Not in direct sunlight
●
Not affected by heat sources
●
On a north or north-west facing façade
When fitting the external sensor on
●
buildings with up to three floors, it should be located two-thirds of the way up the
façade.
●
On buildings with more than three floors, it should be fitted between the second
and third floor.