Vaillant MultiMatic 700/2, Тренинг по продукту

Страница: 50 / 112

multiMATIC 700/2
Notes
10/2015 46 Training 0020228700_00
4.4.1.4 Advanced functions
Please note that only one advanced function can be used at a time.
The function should be enabled if the user spends a day at home outside the usual
sequence. The following changes are made:

The function activates "Automatic mode" for one day with the settings for "Sunday",
as set using the "Time programmes" function.

The desired temperature can be changed using the rotary knob. This change will be
applied permanently as the "Desired day temperature".

The function is automatically deactivated at midnight or cancelled beforehand by
the user. The heating installation will then go back to working in the operating mode
that was previously set.

The "1 day at home" function can be activated from any operating mode.
This function is useful if the user is not at home for a day. The time periods do not
need to be changed, e.g. increasing the target room temperature over the day. This
function makes the system exit the active operating mode as follows:

The target room temperature is set to the "Set-back temperature" and then adjusted
accordingly.

The temperature can be changed using the rotary knob. This change will be applied
permanently as the "Desired set-back temperature".

Hot water generation and the circulation pump are switched off and frost protection
is activated.

The function is automatically deactivated at midnight or may be cancelled by the
user.

The "1 day away from home" function can be activated from any operating mode.
Switches off the zones(s) for ventilating the living rooms. When the "ventilation boost"
function is activated:
1 day at home
1 day away from home
Ventilation boost