Vaillant geoTHERM SERIES Скачать руководство пользователя

Страница: 19 / 56

Installer_manual_OEM_Vaillant_PROTO_3_GB - 06/11 - Vaillant

- 17 -

9.4.2

Transportation of the appliance

With regards to the Manual Handling Operations,

1992 Regulations, the following lift operation exceeds

the recommended weight for a one man lift.

Warning! Two people at minimum are necessary to

move the appliance.

Warning! Do not lean the appliance more than

45° during transportation as this may damage the

refrigeration circuit which could lead to a complete

system failure.

We recommend that you move the appliance with a

trolley or with suitable handling equipment.

If you move the appliance with a two-wheeled trolley, respect the

following regulations:

•

Only lift the appliance from the back.

•

Attach the appliance to the two-wheeled trolley with a strap.

•

Protect surfaces in contact with the trolley to avoid scratching

or damaging the appliance.

•

Use a sufficiently solid ramp to lower the appliance from the

pallet.

•

Move the appliance to the installation site.

9.5

Positioning the appliance

With regards to the Manual Handling Operations,

1992 Regulations, the following lift operation exceeds

the recommended weight for a one man lift.

Key

1 Concrete block

2 Mounting screw

•

Fix the heat pump onto the concrete blocks (1) using the fixing

screws.

INSTALLATION

Содержание geoTHERM SERIES

























































Результаты поиска

Содержание geoTHERM SERIES

Отзывы:

Похожие инструкции для geoTHERM SERIES

Бренды по названию

Популярные бренды

Vaillant geoTHERM SERIES, Установка и обслуживание

Результаты поиска

Содержание geoTHERM SERIES

Отзывы:

Похожие инструкции для geoTHERM SERIES

Бренды по названию

Популярные бренды