Vaillant flexoTHERM exclusive VWF 117/4, Инструкция по установке и обслуживанию, Страница: 41 / 76

Appendix
0020213394_01 flexoTHERM exclusive Installation and maintenance instructions
41
Setting level Values Unit Increment, select, ex-
planation Default setting Setting
Min. Max.
Compressor starts Current value
Build. pump hours Current value h
Build. pump starts Current value
Environm. pump hours Current value h
Environm. pump starts Current value
4-way valve hours Current value h
4-way valve switch. Current value
Fan 1: Hours Current value h
Fan 1: Starts Current value
De-icer 1: Hours Current value h
De-icer 1: Switch Current value
Fan 2: Hours Current value h
Fan 2: Starts Current value
De-icer 2: Hours Current value h
De-icer 2: Switch Current value
Cooling mixer steps Current value
EEV steps, el. expansion valve
steps Current value
EEV-VI steps, el. expansion
valve injection steps Current value
VUV DHW switchings Current value
Well pump hours Current value h
Well pump starts Current value
Heat. rod power cons. Current value kWh
Heat. rod switchings Current value
Heat. rod op. hours Current value h
Installer level
→
Test menu
→
Check programmes
→
P.01 Heating mode Select
P.02 Cooling mode Select
P.03 Hot water handling Select
P.04 Heating rod Select
P.05 Purge building circuit Select
P.06 Purge environment circuit Select
P.07 Purge environment and
building circuit Select
P.08 Manual defrost Select
Installer level
→
Test menu
→
Sensor/actuator test
→
Actuators
Building circuit actuators
T.01 Building circuit pump power 0 100 % 5, off Off
T.02 DHW diverter valve Heating Domestic
hot water Heating, Domestic hot
water Heating
T.03 Cooling diverter valve (only
for passive cooling) Heating Cooling Heating, Cooling Heating
Environment circuit actuators
T.14 Env. circuit pump power 0 100 % 5 0
1)
See overview of fault codes