Installation and maintenance instructions ecoTEC 0020173113_01
19
4
Installation
4.8
Removing/fitting the side panel
You can also remove a side panel for installation or mainte-
nance purposes.
b
Caution.
Risk of damage caused by mechanical
tension.
Removing
both
side panels may cause
mechanical distortion in the boiler, which
can cause damage to the piping and poten-
tially result in leaks.
>
Always only remove
one
side panel,
never both side panels at the same time.
1.
3.
4.
2.
4.7 Removing/fitting the side panel
b
Caution
Risk of damage to the side panel.
Unscrewed side panels that are merely sus-
pended from the back wall can fall down.
>
Hold onto the side panel when you are
unscrewing it, and always remove it from
the boiler.
>
Fold the electronics box (
1.
) forwards.
>
Unscrew the two screws (
2.
) from the top and bottom of
the side panel.
>
Hold onto the side panel (
3.
) when doing this.
>
Swivel the side panel outwards and remove it from below
by pulling it downwards (
4.
).
>
Install the side panel in reverse order.
