Vaillant 0010007508, Инструкция по установке и обслуживанию

Страница: 29 / 44

Appendix
0020258610_00 ecoVIT exclusiv Installation and maintenance instructions
29
Code Parameter
Values
Unit Explanation, selection, increment
Default
setting
Own
setting
Min. Max.
D.040 Flow temperature actual
value Current value
℃ – –
Not ad-
justable
D.041 Return temperature actual
value Current value
℃ – –
Not ad-
justable
D.043 Boiler temperature 0 99
℃
Current boiler temperature
–
Not ad-
justable
D.044 Ionisation value actual
value 0 1020
–
> 700: No flame
< 450: Flame detected
< 250: Excellent flame
–
Not ad-
justable
D.047 Current outside temperat-
ure Current value
℃
If an outdoor temperature sensor is
connected to X41
(with Vaillant weather-compensated
control)
–
Not ad-
justable
D.050 Offset min. speed -40 40 rpm Nominal value set in factory
10
–
D.051 Offset max. speed -40 40 rpm Nominal value set in factory
10
–
D.054 Switch-on hysteresis offset 0 -10
K
1 -2
D.055 Switch-off hysteresis off-
set 0 10
K
1 6
D.060 Number of safety therm.
shut-downs Current value
–
Number of safety cut-out switch-off
sequences
–
Not ad-
justable
D.061 No. of shut-downs in ign.
flame controller Current value
–
Number of unsuccessful ignitions in
the last attempt
–
Not ad-
justable
D.063 Air-monitoring switch-off
sequences Current value
–
Number of switch-off sequences
caused by the air monitoring
–
Not ad-
justable
D.064 Avg. ignition time Current value s
– –
Not ad-
justable
D.065 Max. ignition time Current value s
– –
Not ad-
justable
D.067 Remaining anti-cycl. time
for heating Current value min Remaining burner anti-cycling time
–
Not ad-
justable
D.068 Number of first start at-
tempts Current value
–
Number of unsuccessful ignitions at
1st attempt
–
Not ad-
justable
D.069 Number of second start
attempts Current value
–
Number of unsuccessful ignitions at
2nd attempt
–
Not ad-
justable
D.071 Max. heating target flow
temp. 40 85
℃
Target value maximum heating flow
temperature
1 75
D.072 Pump overrun after cylin-
der charging 0 600 s External heating pump overrun
time after cylinder charging
1 300
D.073 Offset setting for comfort
mode 0 25
K
Cylinder charging offset
Excess temperature between the
target cylinder temperature and
the target flow temperature when
cylinder charging
1 25
D.075 Max. cylinder charging
time 20 90 min Max. charging time for domestic
hot water cylinder without inde-
pendent control system
1 45
D.076 Device Specific Number Current value
–
(Device specific number = DSN)
15: ecoVIT
–
Not ad-
justable
D.077 DHW partial load Output-range-
specific
kW Adjustable cylinder charging output
Maximum value = automatic
cylinder partial load
Maximum
value