Installation 5
0020200969_04 Installation manual
21
43
10
13
3.
Drill the fastening holes away from the centre.
5.4.4.4 Installing the end pipe
1.
Install the second 87° elbow into the last extension.
2.
Securely insert the end pipe into the 87° elbow until the
end pipe clicks into place in the seal.
5.4.4.5 Routing extensions for the variable terminal
kit around eaves
min. 100 mm
When installing the variable terminal kit around eaves, ad-
ditional M8 threaded rods are required for the pipe clamps.
The threaded rods are commercially available.
▶
If required, install additional 45° elbows.
5.4.5
Installing the 80/125 mm diameter
horizontal wall or roof duct, article number
303209
5.4.5.1 Scope of delivery
07
1020
70
3
1
2
4
1
Horizontal wall/roof duct
2
Wall collar, 125 dia-
meter (2 pcs)
3
70 mm clamp (2 pcs)
4
87° elbow
