Vaderstad Rexius Twin Series, Инструкция по эксплуатации

Страница: 16 / 28

Assembly instructions
16 14.04.2014
ver. 2
6 Attach the hydraulic hoses on the implement. See fig. 5in the Spare Parts List.
7 Grease the implement according to the greasing chart. See ”4.1 Regular maintenance” on page
20.
NOTE! It is imperative to retighten the bolt joints (E) at the axel bearing connectors on the frame
supports. The tightening torque should be 540 Nm.
Carry out the first inspection after 10 operating hours.
Figure 2.5
Also retighten the wheel bolts after initial transport on the road (after approx. 20 km).
2.2.1 Fitting the weights (optional)
Figure 2.6
The implement can be weighed down using optional weights. Each weight weighs 45 kg. Hang
the weights on the frame, secure them with 1 stopper (F) on either side and lock the unit with
threaded rods and nuts. Because the weights are heavy, be careful during handling.
E
F