system factory-reset
Gets or sets the factory reset status. When the factory reset status is on, the system resets to factory
defaults on reboot.
Synopsis
system factory-reset{ get | on | off}
Options
get
Returns the camera's current factory
reset status.
on
Enables factory reset on reboot.
off
Disables factory reset on reboot.
Examples
system factory-reset get
Returns the factory reset status in this form:
factory-reset (software):
off
(This evaluates the most recent
system factory-reset
on or off
command, if one has been received.)
factory-reset (hardware):
off
(This reads the rear panel DIP switches and returns the status
on
if
they are all in the down position.)
system factory-reset on
Enables factory reset upon reboot. Returns current status in this form:
factory-reset (software):
on
factory-reset (hardware):
off
42
Integrator's Complete Guide for RoboSHOT HD-SDI PTZ Cameras
