Installing the Camera Mount and the Camera
You can install the camera wall mount to a 2-gang wall box or directly to the drywall.
n
If you mount it to drywall, use the wall anchors provided with the wall mount.
n
If you mount it to a wall box, use the cover plate screws supplied with the wall box.
Caution
Before you start, be sure you can identify the network and RS-232 cables correctly. Connecting a cable to
the wrong port can result in equipment damage.
1. Route the cables through the hole in the back of the mount, and install the mount on the wall or attach it
to the wall box. Leave the screws loose enough to adjust the position of the mount.
2. Level the mount and tighten the mounting screws.
3. Check the level again to avoid any of those weird Batman camera angles.
4. Connect the cables to the camera.
5. Place the camera on the mount.
6. Attach the camera to the mount using the ¼”-20 x .375 mounting screw supplied with the camera.
v
10
Integrator's Complete Guide for RoboSHOT HD-SDI PTZ Cameras
