Function
Description
Gain
Auto / Manual (0 to 28 steps - accessible through external control)
Back-light compensation
On/Off (IR Remote)
Focusing system
Auto Focus / Manual Focus Mode / One Push Trigger Mode / Infinity Mode
/ Near Limit Mode
Pan & Tilt Angle/Speed
Pan/Tilt Angles: ±160°, Tilt: +90°, -30°,
Pan/Tilt Speeds: Both Axes 0.35°/sec to 120°/sec
Noise Reduction
On/Off, 6 Steps, Off through 5 (accessible through external control)
Aperture/Detail
16 Steps (accessible through external control)
Supported Streaming
Simultaneous IP (RTSP format with H.264 compression) up to 1080p/30
Control Interface(s)
Vaddio IR Remote Commander
Web interface for network set-up, IP streaming, firmware updates and
camera management
Telnet serial command API
RS-232 API: Modified VISCA Emulation (TTL signal level), Baud rate:
9600 bps and 38,400 bps, 1 stop bit. Default to 9.6 Kb/s for Cat-5e
Distance
Connectors
Power 12 VDC: EIAJ-04 Connector with Positive Center
Network PoE+: Shielded RJ-45 PoE+ Gigabit Ethernet Port with LEDs to
show connection and usage, RTSP Format
HD-SDI: Carrier Class, edge mount BNC connector with gold contacts,
Compliant with SMPTE 424M (3Gb/s 1080p/60 and 1080p 59.94)
HDMI: HDMI jack with screw flange mounted to back panel
RS-232: Shielded RJ-45, Carries bidirectional control to and from the
camera.
Rear Panel Controls
16-position rotary switch for resolution selection
8-position DIP switch for IR frequency, image flip, wide mode, and reset to
default settings
Power Supply
12 VDC, 3.0 Amp Power Supply
PoE+ Switch or PoE+ Power Injector (25.5w over Cat-5 at a distance of
328’ or 100m)
Compatible Vaddio
Controllers
ProductionVIEW Precision Camera Controller
ProductionVIEW HD-SDI MV Controller/Switcher
Operating/Storage
Temperature/Humidity
0°C (32°F) to 40°C (104°F), 20% to 80% relative humidity
Mass
4.85 lbs.(2.2 kg)
Dimensions
6.942” (176.3mm) H x 7.056” (179.2 mm) W x 6.757” (171.6mm) D,
Specifications are subject to change without notice.
61
Integrator's Complete Guide for RoboSHOT HD-SDI PTZ Cameras
