vacuubrand RE 2.5, Инструкция по эксплуатации

Страница: 45 / 80

45 20901559_EN_RE_RZ_V7_230523
Commissioning (operation)
5.2.2 5.2.2 Condensate in catchpots (optional) Condensate in catchpots (optional)
Operating the pump with condensate in the catchpots
>
Observe the condensate levels in the catchpots of the sepa‑
rator at the inlet (optional) and of the oil mist filter (optional).
ƒ
The condensate level in the separator at the inlet must always
be kept below the bottom of the separator tube.
ƒ
The condensate level in the oil mist filter must always be kept
below the bottom edge of the filter.
ƒ
In case of a clogged filter, oil mist might be visible in the oil filter
housing, or the filter might be discolored or exhibit deposits on
the inside. Replace the filter element of the oil mist filter if it is
clogged. Disassemble the oil mist filter to replace the filter ele ‑
ment. Under certain circumstances, clogged filter elements can
be cleaned using suitable solvents. However, it is safer to use a
new filter element.
Drain condensate
Drain the catchpots in time.
>
Wear your personal protective equipment.
>
Switch off the vacuum pump.
>
Ventilate the vacuum pump.
>
Open the drain screw of the transparent catchpot and drain
the condensate.
>
Comply with regulations when disposing of condensates and
chemicals thereby taking contaminations due to pumped sub ‑
stances into account.
>
Do not reuse separated oil if it is contaminated or discolored.
Condensates in
optional catchpots
Drain condensate