CONTROL KEYPAD
vacon • 79
7
7.3.2
Parameter menu (M2)
Parameters are the way of conveying the commands of the user to the AC drive. The parameter values can
be edited by entering the
Parameter Menu
from the
Main Menu
when the location indication M2 is visible
on the first line of the display. The value editing procedure is presented in Figure 7-5.
Push the
Menu button right
once to move into the
Parameter Group Menu (G#)
. Locate the parameter
group desired by using the
Browser buttons
and push the
Menu button right
again to enter the group and
its parameters. Use again the
Browser buttons
to find the parameter
(P#)
you want to edit. From here you
can proceed in two different ways: Pushing the
Menu button right
takes you to the edit mode. As a sign of
this, the parameter value starts to blink. You can now change the value in two different manners:
1
Just set the new desired value with the
Browser buttons
and confirm the change with the
Enter
button
. Consequently, the blinking stops and the new value is visible in the value field.
2
Push the
Menu button right
once again. Now you will be able to edit the value digit by digit. This
editing manner may come in handy, when a relatively greater or smaller value than that on the
display is desired. Confirm the change with the
Enter button
.
The value will not change unless the Enter button is pushed. Pressing the
Menu button left
takes you
back to the previous menu.
Several parameters are locked, i.e. uneditable, when the drive is in RUN status. If you try to change the
value of such a parameter the text
*Locked*
will appear on the display. The AC drive must be stopped in
order to edit these parameters.
The parameters values can also be locked using the function in menu M6 (see Chapter Parameter lock
(P6.5.2)).
You can return to the
Main menu
anytime by pressing the
Menu button left
for 3 seconds.
The basic application package "All in One+" includes seven applications with different sets of parameters.
You will find the parameter lists in the Application Section of this manual.
Once in the last parameter of a parameter group, you can move directly to the first parameter of that group
by pushing the
Browser button up
.
See the diagram for parameter value change procedure on page 80.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
Содержание NX_ 0003 5
Страница 11: ...Phone 800 894 0412 Fax 888 723 4773 Web www clrwtr com Email info clrwtr com...
Страница 12: ...Phone 800 894 0412 Fax 888 723 4773 Web www clrwtr com Email info clrwtr com...
Страница 13: ...Phone 800 894 0412 Fax 888 723 4773 Web www clrwtr com Email info clrwtr com...
Страница 52: ...52 vacon CABLING AND CONNECTIONS 6 Phone 800 894 0412 Fax 888 723 4773 Web www clrwtr com Email info clrwtr com...
