Vacon NX_ 0003 5, Руководство пользователя

Страница: 14 / 114

14 • vacon RECEIPT OF DELIVERY
3
3.
RECEIPT OF DELIVERY
Vacon NX_ AC drives have undergone scrupulous tests and quality checks at the factory before they are
delivered to the customer. However, after unpacking the product, check that no signs of transport
damages are to be found on the product and that the delivery is complete (compare the type designation of
the product to the code below,(Figure 3-1).
Should the drive have been damaged during the shipping, please contact primarily the cargo insurance
company or the carrier.
If the delivery does not correspond to your order, contact the supplier immediately.
In the small plastic bag included in the delivery you will find a silver Drive modified sticker. The purpose of
the sticker is to notify the service personnel about the modifications made in the AC drive. Attach the
sticker on the side of the AC drive to avoid losing it. Should the AC drive be later modified (option board
added, IP or EMC protection level changed), mark the change in the sticker.
3.1 Type designation code
NXS 0000
A 2 H 1 S SV A1A20000C3 5
nk3_1.fh8
Product range: NXS = standard, NXP = high-performance
Nominal current (low overload)
0007 = 7 A, 0022 = 22 A, 0205 = 205 A etc.
Nominal mains voltage (3-phase):
2 = 208–240Vac, 5 = 380–500Vac, 6 = 525–690Vac (All 3-phase)
Control keypad:
A = standard (alpha-numeric)
B = no local control keypad
F = dummy keypad
G = graphic display
Enclosure class:
0 = IP00 (FR9 only), 2 = IP21/NEMA 1, 3 = IP21/NEMA 1 (cabinet-mounted)
5 = IP54 (NEMA 12), 7 = IP54/NEMA 12
EMC emission level:
C = fulfils requirements of category C1 of standard EN61800-3 (2004),
1st environment and rated voltage less than 1000V
H = fulfils requirements of category C2 of standard EN61800-3 (2004),
fixed installations and rated voltage less than 1000V
L = fulfils requirements of category C3 of standard EN61800-3 (2004),
2nd environment and rated voltage less than 1000V
T = fulfils standard EN61800-3 (2004) when used in IT networks
N = No EMC emission protection. An external EMC filter needed
Brake chopper
0 = no brake chopper
1 = internal brake chopper
2 = internal brake chopper and resistor
Option boards; each slot is represented by two characters where:
A = basic I/O board, B = expander I/O board,
C = fieldbus board, D = special board
Hardware modifications; Supply - Mounting - Boards
Sxx = 6-pulse connection (FR4 to FR14)
Bxx = Additional DC-connection (>FR8)
Jxx = FR10...12 stand-alone with main switch and DC-link terminals
xSx = Air-cooled drive
xxS = Standard boards (FR4 to FR8)
xxV = Varnished boards (FR4 to FR8)
xxF = Standard boards (FR9 to FR14)
xxG = Varnished boards (FR9 to FR14)
xxA = Standard boards (FR10 to FR12 standalone drives)
xxB = Varnished boards (FR10 to FR12 standalone drives)
Figure 3-1. Vacon NX_ type designation code
Note: Ask factory for other possible installation combinations.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com