manualshive.com logo in svg

Vacon 100X series, Руководство по установке и обслуживанию

Поделиться
Скачать
Vacon 100X series Скачать руководство пользователя страница 71

Options

vacon • 68

8

8.2.5

Vacon keypad with graphical display

The graphical keypad features an LCD display and 9 buttons.

8.2.5.1

Keypad display

The keypad display indicates the status of the motor and the drive and any irregularities in motor or
drive functions. On the display, the user sees information about his  present location in the menu
structure and the item displayed.

8.2.5.2

Main menu

The data on the control keypad are arranged in menus and submenus. Use the Up and Down arrows
to move between the menus. Enter the group/item by pressing the OK button and return to the for-
mer level by pressing the Back/Reset button.

The 

Location field

 indicates your current location. The 

Status field

 gives information about the

present status of the drive. See Figure 50.

Figure 50. Main menu.

8.2.5.3

Using the graphical keypad

Editing values

Change value of a parameter following the procedure below:

1.

Locate the parameter.

2.

Enter the 

Edit 

mode.

3.

Set new value with the arrow buttons up/down. You can also move from digit to digit with the
arrow buttons left/right if the value is numerical and change then the value with the arrow but-
tons up/down.

4.

Confirm  change  with  OK  button  or  ignore  change  by  returning  to  previous  level  with  Back/
Reset button.

Location field

Status field

(Parameter ID number 

Main Menu

Quick Setup

( 17 )

Parameters

( 12 )

STOP

READY

I/O

ID:

M1

( 5 )

Monitor

Activated group/item. Press OK to enter.

Number of items in the group

STOP/RUN 

Status field
READY/NOT READY/FAULT

Control place:
PC/IO/KEYPAD/FIELDBUS

ALARM

and current menu location) 

Direction 

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Содержание 100X series





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды