V7 CHGCT36-1E, Руководство пользователя

Страница: 10 / 69

Charging System
Charging all of your devices at one time can overload a typical circuit. V7 Charge Carts are equipped with a built-in timing device that automatically switches the AC power supply from one half
of the device outlets to the other, at specified intervals to help protect against overload.
The timer module will provide power to each set of 18 outlets for the amount of time indicated on the timer (default is set to 15 minutes). When that time expires, the cart will change
power to the other set, and continue to alternate sides. Every time power is turned off and then restored to the cart, power starts with the first set.
The LED indicator on the outside of the cart will show you which set is currently charging.
The timer is factory-set on a 15-minute cycle. Devices with fully depleted batteries will require more than one cycle to fully charge.
Circuit Breaker:
There is a circuit breaker on the cart. If there is no power to internal and external outlets, check to see if the circuit breaker is tripped.
The LED indicator
will illuminate red
when charging
ADV
ANCED
FEA
TURES