![background image](http://html1.mh-extra.com/html/v2/peso-230v/peso-230v_manual_3122987049.webp)
ENGLISH
47
DISPLAY
DATA
FUNCTION
DEFAULT MEMO
Strt
Activation inputs function
This menu allows selecting input operation modes (see chapter 4.4)
StA n
StA n
Standard mode
no
Start inputs from terminal board are disabled.
Radio inputs operate in standard mode
StA n
A P.Ch
Open/Close command
PrES
Manned operation
oroL
Timer mode
Sto P
Stop Input
no
no
The input STOP is not available (ignored by the control unit)
ProS
The input STOP stops the gate: pressing the command START the gate
continues the motion
invE
The command STOP stops the gate: at the next START the gate starts moving
in the opposite direction
Fot 1
Photocell 1 input
This menu allows enabling the input for type 1 photocells, that is to say,
photocells active both during the opening and closing phase
no
no
Input disabled (ignored by the control unit)
A P.Ch
Input enabled
Fot 2
Photocell 2 input
This menu allows enabling the input for type 2 photocells, that is to say,
photocells non active during the opening phase
CFCh
CFCh
nput enabled even at standstill gate too: the opening movement does not
start if photocell is interrupte
Ch
Input enabled for the closing phase only
WARNING: if you select this option, you must disable photocell test
no
Input disabled (ignored by the control unit)
Ft.tE
Test of the photocells
no
no - Si
In order to achieve a safer operation for the user, the unit performs a
photocells operational test, before a normal working cycle.
If no operational faults are found, the gate starts moving.
Otherwise, it will stand still and the flashing light will stay onfor 5 sec.
The whole test cycle lasts less than one second.
Содержание PESO-230V
