ESP
AÑOL
- 87 -
PARÁMETRO VALOR
DESCRIPCIÓN
DEFAULT
MEMO
En.SA
Función ENERGY SAVING
Esta función es útil para reducir los consumos en stand-by de la
automatización.
Si la función está habilitada, la central entrará en modo ENERGY
SAVING en las siguientes condiciones:
• 30 segundos después del final de un ciclo de trabajo
• 30 segundos después de una apertura (si el cierre automático
no está habilitado)
• 30 segundos después de salir del menú de programación
En modo ENERGY SAVING se desactiva la alimentación de accesorios,
display, intermitente y electroimán de retención.
La salida del modo ENERGY SAVING se produce:
• Si se activa un ciclo de trabajo
• Si se pulsa uno de los botones de la central
NOTA: durante el funcionamiento con batería, si el nivel de
carga no es suficiente para activar la automatización (el display
muestra Err0) la función ENERGY SAVING (Ahorro de energía) se
activa automáticamente para reducir el consumo en espera del
restablecimiento de la alimentación de red.
no
no
Función inhabilitada
Si
Función habilitada
t.AP1
Tiempo de apertura hoja 1
22.5”
0.0”-5’00
Tiempo ajustable de 0 segundo a 5 minutos
t.AP2
Tiempo de apertura hoja 2
22.5”
0.0”-5’00
Tiempo ajustable de 0 segundo a 5 minutos
ATTENZIONE
: no se conecta el motor 2, este tiempo tiene que ser
programado a cero
t.APP
Tiempo de apertura parcial (entrada peatonal)
6.0”
0.0”-1’00
Si se recibe un comando de Start Peatonal, el cuadro abre solo la hoja 1
por un tiempo reducido. El tiempo máximo programable es
t.AP1
t.Ch1
Tiempo de cierre hoja 1
23.5”
0.0”-5’00
Tiempo ajustable de 0 segundo a 5 minutos
ATENCION
: Para evitar que la hoja no se cierre completamente, se
aconseja programar un tiempo superior al de apertura
t.AP1
t.Ch2
Tiempo de cierre hoja 2
23.5”
0.0”-5’00
Tiempo ajustable de 0 segundo a 5 minutos
ATENCION
: Para evitar que la hoja no se cierre completamente, se
aconseja programar un tiempo superior al de apertura
t.AP2
t.ChP
Tiempo de cierre parcial (entrada peatonal)
7.0”
0.0” - 2’00
En caso de apertura parcial, el cuadro utiliza este tiempo para el
cierre. El tiempo máximo programable es
t.Ch1
.
ATENCION
: Para evitar que la hoja no se cierre completamente, se
aconseja programar un tiempo superior al de apertura
t.APP
t.C2P
Tiempo de cierre hoja 2 durante el ciclo peatonal
no
0.5” - 5.0”
Durante el ciclo de apertura parcial (acceso peatonal) la hoja 2 podría
moverse ligeramente debido al viento o por el propio peso; en este caso
en el momento del cierre la hoja 1 podría golpear la hoja 2 y la puerta no
quedar perfectamente cerrada.
Para evitar esto, en los últimos segundos del ciclo, se aplica una ligera
fuerza en cierre también en la hoja 2
no
Función desactivada
Содержание CITY2+L
