V2 36A022, Руководство пользователя

Страница: 58 / 132

ENGLISH
- 56 -
PARAMETER VALUE DESCRIPTION DEFAULT MEMO
SEnS
Enable the obstacle sensor
no
1.0A - 10.0A
This menu allows you to regulate the sensitivity of the obstacle sensor.
When the current absorbed by the motor exceeds the set value, the
controller detects an alarm.
During the opening, an obstacle would cause the arrest of the boom.
During the closing, an obstacle would cause the complete reopening, in
order to free the obstacle.
In both cases the automatic closing comes disabled the second time that
the cycle is interrupted by an obstacle.
If the obstacle is found nearing the of the travel height, is interpreted as a
mechanical arrest
no
Function deactivated
rA.AP
Slow down in opening
25
0 - 1 00
This menu allows regulating the percentage of the ride/drive that is carried
out at reduced speed during the last opening stretch
rA.Ch
Slow down in closing
25
0 - 1 00
This menu allows regulating the percentage of the ride/drive that is carried
out at reduced speed during the last closing stretch.
St .AP
Start command during the opening phase
This menu allows fixing the control unit conduct in case it receives a Start
command during the opening phase.
PAUS
PAUS
The barrier closes and enters in pause
ChiU
The barrier immediately starts to reclose
no
The barrier continues to open (the command is ignored)
St .Ch
Start command during the closing phase
This menu allows fixing the control unit conduct in case it receives a Start
command during the closing phase
StoP
StoP
The barrier closes and the cycle is considered concluded
APEr
The barrier reopens
St .PA
Start command during the pause
This menu allows establishing the behavior of the control units if a Start
command is received while the barrier is opened in pause.
ChiU
ChiU
The barrier starts to reclose
no
The command is ignored
PAUS
The pause time becomes recharged (
Ch.AU
)
Ch.AU
Automatic Closing
In automatic operation, the control unit automatically recloses the barrier
at the end of the preset time
no
no
Function deactivated
0.5” - 20’0
The barrier recloses after the time set