-5-
•
If setting mode has not been exited, you can change the calling mode by pressing KEY1 circularly
•
The
LED_NAME
indicator will blink until
the
setting mode
is exited
•
No
operation
for
10 seconds
will exit
the
setting mode automatically
•
P
ress
KEY_SET
button three times to exit the setting mode manually
SETUP INSTRUCTIONS
Refer to the manual for Video Monitor for more info about monitor address setting
Each call button will respond different addresses when set in different calling mode
s
Refer to the following for more information
Call buttonA:
call the monitor with address
01
by default
Call buttonB:
call the monitor with address
02
by default
Call buttonC:
call the monitor with address
03
by default
Call buttonD:
call the monitor with address
04
by default
Call buttonA:
Call all monitors in group address from
00~15
(one of the monitor should be set to
00
)
Call button
B,C,D:
Call all monitors in group address
from 16~31
(one of the monitor should be set to
16
)
UNLOCK Indicator:OFF
TALK Indicator:ON
In standby mode, press
KEY_SET
button twice
UNLOCK Indicator:OFF
TALK Indicator:ON
Press
KEY_1
button to
activate
Standard calling
mode for door station
UNLOCK Indicator:OFF
TALK Indicator:ON
Press
KEY_1
button again
to activate
Group calling
mode for door station
Press
KEY_1
A
B
C
A
B
C
D
A
A
B
1.Standard
C
alling
M
ode
(Address range 01-04 default)
2.Group
C
alling
M
ode
To change this setting, please follow the steps:
Содержание DT607C-S1
Страница 2: ......
Страница 19: ...16 Note...