V-TEK DT607C-S1, Руководство пользователя

Страница: 10 / 20

-7-
SETUP INSTRUCTIONS
Setting Nameplate Illumination Mode
There are 3 illumination modes for nameplate
:
Normally
O
n , Normally
O
ff and Auto
Normally
O
n is default
. T
o change the setting, please follow the steps:
UNLOCK Indicator:ON
TALK Indicator:OFF
In standby mode, press
KEY_SET button three
times
UNLOCK Indicator:ON
TALK Indicator:OFF
Press KEY_3 button to set
the nameplate illumination
mode to Normally
On
UNLOCK Indicator:ON
TALK Indicator:OFF
Press KEY_3 button again
to set the nameplate illumina-
tion mode to Normally off .
UNLOCK Indicator:ON
TALK Indicator:OFF
Press KEY_3 button again and
again to set the nameplate
illumination mode to Auto
Press KEY_3
• If setting mode has not been exited, you can change the nameplate illumination mode by pressing KEY3
circularly
• The
LED_NAME
indicator will blink until the setting mode
is exited
•
No
operation
for
10 seconds will exit
the
setting mode automatically
•
P
ress KEY_SET button twice to exit the setting mode manually
Setting Night View LED Illumination Mode
There are 3 working modes for night view LED indicator
:
Normally
O
n , Normally
O
ff
,
Auto
Auto is default
. T
o change the setting, please follow the steps:
UNLOCK Indicator:ON
TALK Indicator:OFF
In standby mode, press
KEY_SET button three
times
UNLOCK Indicator:ON
TALK Indicator:OFF
Press KEY_4 button to set
the night view LED mode
to Normally
O
n
UNLOCK Indicator:ON
TALK Indicator:OFF
Press KEY_4 button again
to set the night view LED
mode to Normally
O
ff
UNLOCK Indicator:ON
TALK Indicator:OFF
Press KEY_4 button again
and again to set the night
view LED mode to Auto
Press
KEY_4
• If setting mode has not been exited, you can change the night view LED illumination mode by pressing
KEY4 circularly
• The LED_NAME indicator will blink until the setting mode
is exited
•
No
operation
for
10 seconds will exit
the
setting mode automatically
•
P
ress
KEY_SET
button twice to exit the setting mode manually