MINI BT CONTROLLER
Quick Start Guide
r
Each Mini LOOP BT Controller includes:
Item Description
Quantity
A
LOOP Mini Controller w/Bluetooth
1
B
Temperature Sensor
1
C
3M Adhesive
1
D
Mounting Bracket
1
E
Wood Screws
2
LED Light
Connector
DC12V
TEMP
MOUNTING INSTRUCTIONS
IMPORTANT: If you are missing anycomponents,
do not contact your retailer. Please contact us at:
www.current-usa.com/warranty
WHAT’S INCLUDED
DC12V
TEMP
12V DC
Power
Temperature
Sensor
microUSB
HUB Connections
TOP
BOTTOM
LED Light Connector
IMPORTANT - BEFORE INSTALLATION
Unplug all power to any existing LOOP products.
When connecting LOOP products to controller, gently slide connector in and tighten.
Do not twist or rotate. Excessive force can damage pin connections.
1. Remove controller and all components from packaging.
2. Locate a mounting position for controller, ensuring it is in a dry
place away from water splashing, salt creep or dripping water.
3. Clean mounting location of any dirt or debris using a damp rag.
4. Attach Controller mount to cabinet using either 2 wood screws
or 3M Adhesive (included).
DO NOT expose controller to moisture, water or salt creep.
DO NOT use with LOOP IR Controller or Remote (they are not compatible)
CABLE CONNECTIONS
1. Connect LED light to Mini BT controller by gently
pushing into top 3-pin connector and tightening.
2. Place temperature sensor into sump or aquarium
and attach using suction cup.
3. Connect Temperature sensor to Temperature USB
port on bottom of controller.
4. Attach controller to cabinet by sliding vertically into
mounting bracket.
Slide into Bracket
A
B
C
D
E
