V-TEK DT607C-S1, Руководство пользователя

Страница: 12 / 20

-9-
Connecting Electric Lock
Door Lock Controlled with Internal Power
Door Lock Controlled with Dry Contact
1.Electronic lock of Power-on-to-unlock
type should be used
2.The door lock is limited to 12V, and
holding current must be less than
2
5
0m A
3.The jumper should be placed on position
2 and 3 before connecting
the lock
4.The door lock control is not timed from
Exit Button(EB)
. Can be timed with
additional RLC Lock Control Interface
5.The
Unlock Mode
must be set to 0
(
default)
1.The external power supply must be used
according to the lock
specs
2.The inside relay contact is restricted to
230Vac 1A or 24Vdc 1A
3.
T he
j
umper must be taken off
before connecting the lock
4.Set the
Unlock Mode
according to
different lock types
:
• Power-on-to-unlock type:Unlock
Mode=0 (default)
• Power-off-to-unlock type:Unlock
Mode=1
EB
*
LOCK
Jumper position on 2&3
1 2 3
L1 L2 PL S+ S-
Take off the jumper
1 2 3
L1 L2 PL S+ S-
LOCK
POWER
SUPPLY
WIRING
* DT-RLC
Lock Control Interface
is needed
to connect second lock or to make EB timed