V-TAC VT-6608303, Инструкция по эксплуатации

Страница: 21 / 54

WARNING!
• Make sure the EPS load power rating is within EPS output rating, otherwise
the inverter will shutdown with an "over load" warning.
• When an "over load" is appeared, adjust the load power to make sure it is
within the EPS output power range, then turn the inverter back on.
BATTERY CONNECTION
• Charging & discharging system of inverter is designed for high-voltage lithium battery.
Before choosing battery, please note the maximum voltage of battery can not exceed 59V
and the rated voltage of battery can not exceed 48V, and the battery communication
should be compatible with BD Hybrid inverter.
• Battery breaker Before connecting to battery, please install a nonpolarized DC breaker to
make sure inverter can be securely disconnected during maintanance.
Below table shows some common feasible loads for you reference.
MODEL VT-6608303
CURRENT [A] 80A
Nominal voltage of DC breaker should be larger than
maximum voltage of ba�ery.
VOLTAGE
VT series