V-fit HYBRID DUAL HYDRAULIC SCULLING ROWER, Сборка и руководство пользователя

Страница: 21 / 24

Assembly
Carefully Slide open the front cover of the Monitor (21) and install
one "AAA" battery (not included). Fit the Exercise Monitor (21) by
removing the backing from the Velcro strips on the back of the
casing and carefully placing this as close to the Footplate Crossbar
Support Tube as possible. Connect the Exercise Monitor Cable (48)
into the Socket on the back of the Exercise Monitor.
7
FULLY TIGHTEN all Bolts, Nuts and
Fittings now, ensuring that your
product in located on a clear flat
surface before doing so. Your
product will now be ready to use.
Note
4L 8
13
4R
8
Low
Hig
h
Tension
Tension
Low
High
48
21
Take care to ensure that the
MALE end of the Exercise
Monitor Sensor Cable (48) is
pushed home firmly before
finally fitting the Exercise
Monitor in place. (You will hear /
feel 2 clicks indicating that
correct contact has been made).
Note
Page