V-fit HYBRID DUAL HYDRAULIC SCULLING ROWER, Сборка и руководство пользователя

Страница: 17 / 24

Assembly
Do NOT FULLY TIGHTEN any
Bolts, Nuts or Fittings at this
stage unless specifically
instructed to do so.
Note
1
Remove the 4 x M6 x 15mm Hex Bolts (38) from the Seat (10).
Attach the Seat Carriage (5) to the Seat (10) with the previously
removed 4 x M6 x 15mm Hex Bolts (38). Remove the M8 x 110mm
Carriage Bolt (32), 2 x Seat Carriage Guide Rollers (28), 1 x M8 Flat
Washer (44) and 1 x M8 Nylon Lock Nut (40) from the Seat Carriage (5).
2
Place the assembled Seat Carriage (5) on the floor and turn the
Main Frame (1) upside down and lay it in the Seat Carriage (5).
Insert the previously removed M8 x 110mm Carriage Bolt (32)
through the 2 x Seat Carriage Guide Rollers (28) and fix them with
1 x M8 Flat Washer (44) and 1 x M8 Nylon Lock Nut (40). Turn
the Main Frame (1) over and check that the assembled Seat
carriage (5) is free to move.
Page 17