V-fit HYBRID DUAL HYDRAULIC SCULLING ROWER, Сборка и руководство пользователя

Страница: 19 / 24

Assembly
Connect the Rowing Arms (4L/R) to the Main Frame Floor Supports
(3L/R) with 2 x M8 x 42mm Bolts (33), 2 x M8 Flat Washers (44)
and 2 x M8 Nylon Nuts (40). Fix the Hydraulic Cylinders (8) to the
Main Frame Floor Supports (3L/R) and Rowing Arms (4L/R) with
4 x M8 x 42mm Bolts (33), 4 x M8 Flat Washers (44) and 4 x M8
Nylon Nuts (40). Connect the 2 x Slot Type Adjust Clamp (13) with
2 x M8 x 40mm Hex Bolts (34).
5
Tighten these bolts until all
freeplay has been taken up in
the pivot bracket, but take care
not to over-tighten which will
damage the pre fitted Rowing-
Arm Pivot Bushes (15). Over-
Note
tightening will also cause
squeaking as the nylon Rowing-
Arm Pivot Bushes will rub
excessivly against the pivot
brackets. This condition can be
alleviated by spraying with a wax
based furniture polish prior to
assembly.
Page 19