PSC = Total quantity. An underlined heading will be
transmitted if
M+
is pressed for the first time.
NOTE 2
:
By pressing
M+
again, the data of 2
nd
transaction is
transmitted.
NOTE 3
:
+++
means the count number is added to memory by manual
entry.
NOTE 4
:
When the total accumulated transaction is erased (by
pressing
MR
followed by
CLEAR
), the total number of
transaction, total accumulated weight and count number
are transmitted.
A consecutive dot line sent before the accumulated result
denotes the total accumulated value.
5.14 RECHARGE THE SCALE
When the
LO-BAT INDICATOR
appears, recharge the scal e
immediately.
Fail to do so will damage the rechargeable
battery inside
. Recharging is possible during operation.
The charge status is indicated by the
In-Charge INDICATOR
as below:
RED: Battery is charging.
GREEN: Battery charge completed.
6. TROUBLESHOOTING
Syndrome Scale cannot be turned on
Check:
Is the scale charged?
Action:
Recharge the scale for at least 8 hours
before use for the first time or plug in
the power adaptor before power on the scale.
Check
Is the power adaptor plug in properly into
both the electricity outlet and the DC inlet
of scale?
Action:
Secure both ends of the power adaptor and
try again.
Syndrome
Scale turned off automatically
Check
Is the
AUTO POWER OFF
function enabled?
Action
Refer to
4.4.3
to disable the
AUTO POWER
OFF
function.
Check
Is the
LO-BAT
INDICATOR
on?
Action
Apply the power adaptor.
Syndrome
Rated capacity cannot be reached
Check
Is the
TARE
INDICATOR
on?
Action:
Turn the scale off. Remove all loads from
platter and turn on again.
Check
Is there anything obst ructing the platter?
Action
Remove all obstacles.
