Syndrome
When turning on scale, all display PANEL
blank out but only the ZERO and TARE
INDICATOR appear
Check
Is any load applied to platter when turning
scale on?
Action:
Turn scale off. Remove all loads from
platter and turn scale on again.
Check
Is the platter inserted properly?
Action:
Turn scale off. Insert platter properly and
turn scale on again.
Syndrome
WEIGHT and TOTAL COUNT PANEL blank out
during operation
Check
Does the load applied to platte r exceed the
rated capacity of scale?
Action
Remove all loads from platter and try to
put less loads.
Syndrome
Weighing result is not accurate
Check
Is the scale placed in a level condition?
Action
Adjust the adjustable feet to a level
condition.
Check
Is the scale affected by airflow, vibration
or RFI?
Action:
Place the scale away from all
interferences.
Check
Is the scale calibrated correctly?
Action
Contact your dealer.
7. ERROR CODES AND DESCRIPTIONS
Err_1:
Accumulation error.
M+
cannot be activate d when weight applied is
zero or while the same transaction has already
been accumulated.
Err_2:
EEPROM parameter error.
Contact dealer for service.
Err_3:
Offset value too low.
Contact dealer for service.
Err_4:
Offset value too high.
Removed al l loads from platter and restart again.
Should same error code appear again, contact
dealer for service.
Err_5:
The calibrated weight applied is out of range.
Contact dealer for service.
