7. MC KEY
Press this key to clear all data kept in memory.
8. TARE KEY
Press this key to tare off the weight of a
container. Refer to
SPECIFICATIONS
for maximum
tare range.
9. ZERO KEY
Press this key to set weight to zero. Refer
to
SPECIFICATIONS
for maximum zero range.
10. CHECK KEY
Press this key to set upper weight and count
check limit.
11. PLU PRESET SET KEY
Press this key to set a unit piece weight to
PLU.
12. PLU RECALL KEYS
Press these keys to recall the unit piece weight
stored in the corresponding PLU location.
13. ZERO INDICATOR
When a zero weight is detected, an arrow will
appear and point at this indicator.
14. TARE INDICATOR
When the tare function is in operation, an arrow
will appear and point at this indicator. The
weight being displayed on the
WEIGHT PANEL
is
the net weight.
15. LO-BAT INDICATOR
When the battery inside scale is low, this
indicator would light on (keep flushing for
OVC).
Recharge the scale immediately. Failure
to do so may cause unrecoverable damage to the
battery.
(OVC) This indicator would remain light on when
the unit is under standby status.
16. CHARGING INDICATOR
This indicator shows the recharging status of
the battery. Red color: Recharging battery;
Green color: Charging completed
