a. The quantity added to platter is more than
4 pieces of previous maximum counts
previously attained from the same
transaction.
b. The quantity added to platter is less than
100% of previous maximum counts previously
attained from the same transaction.
If the above requirements are met, a new unit
piece weight will be displayed on the
UNIT
WEIGHT PANEL
and confirmed by an audio "beep".
AUTO UNIT PIECE WEIGHT ENHANCEMENT
function
will be terminated when a zero weight is
detected during the transaction process.
It is strongly recommended that this function
should be employed when the unit piece weight
is unknown or when the individual unit piece
weight is not standardized.
5.9 ACCUMULATED COUNTING TRANSACTION
a. Obtain a transaction result 5.5 and 5.6
b. Press
M+
to save weight and total count to
memory.
c. Scale displays "
TOT 1
" on the
WEIGHT PANEL
,
1
donates this is the first memory entered.
The weight and total count of current
transaction are saved to memory.
d. The
M+ INDICATOR
(OEC & OAC) appears to
indicate that memory is now containing data.
e. Repeat above steps for subsequent counting
transactions.
NOTE 1
: If no unit piece weight is applied,
only weight data will be saved to memory.
NOTE 2
: A quantity value could be manually added
to memory by entering the quantity and then
press
M+
.
5.10 RECALL ACCUMULATED DATA FROM MEMORY
a. Press
MR
b. Scale displays "
TOT #
" on the
WEIGHT PANEL
.
#
donates the total number of entries saved
to memory. Then, the total accumulated
weight and total count are displayed on the
WEIGHT
and
TOTAL COUNT PANEL
respectively.
c. The scale will return to normal operating
status 2 seconds after the accumulated data
is displayed.